Code: Alles auswählen
"integration_manifest": {
"domain": "ecowitt",
"name": "Ecowitt",
"codeowners": [
"pvizeli"
],
"config_flow": true,
"dependencies": [
"webhook"
],
"documentation": "https://www.home-assistant.io/integrations/ecowitt",
"iot_class": "local_push",
"requirements": [],
"version": "1.0.0",
"is_built_in": false,
"overwrites_built_in": true
},
"setup_times": {
"null": {
"setup": 5.9945014072582126e-05
},
"51acd3429b9c7067e2e14dab4a8fe99f": {
"wait_import_platforms": -10.757262790008099,
"config_entry_setup": 10.758530826991773
}
},
"data": {
"device": {
"name": "GW2000A_V3.1.5",
"model": "GW2000A",
"frequency": "868M",
"version": "143"
},
"raw": {
"__type": "<class 'multidict._multidict.MultiDict'>",
"repr": "<MultiDict('stationtype': 'GW2000A_V3.1.5', 'runtime': '7102178', 'heap': '158428', 'dateutc': '2025-03-28 11:49:42', 'tempinf': '69.44', 'humidityin': '48', 'baromrelin': '30.038', 'baromabsin': '27.882', 'tempf': '50.18', 'humidity': '55', 'winddir': '50', 'windspeedmph': '0.00', 'windgustmph': '2.01', 'maxdailygust': '7.38', 'solarradiation': '471.96', 'uv': '3', 'rrain_piezo': '0.000', 'erain_piezo': '0.000', 'hrain_piezo': '0.000', 'drain_piezo': '0.000', 'wrain_piezo': '0.276', 'mrain_piezo': '0.843', 'yrain_piezo': '5.654', 'ws90cap_volt': '5.3', 'ws90_ver': '143', 'srain_piezo': '0', 'temp1f': '46.94', 'humidity1': '80', 'temp2f': '55.40', 'humidity2': '64', 'soilmoisture1': '35', 'soilad1': '197', 'soilmoisture2': '36', 'soilad2': '185', 'soilmoisture3': '64', 'soilad3': '310', 'soilmoisture4': '24', 'soilad4': '160', 'soilmoisture5': '30', 'soilad5': '170', 'soilmoisture6': '31', 'soilad6': '183', 'soilmoisture7': '40', 'soilad7': '208', 'soilmoisture8': '71', 'soilad8': '329', 'leak_ch1': '0', 'batt1': '0', 'batt2': '0', 'soilbatt1': '1.6', 'soilbatt2': '1.5', 'soilbatt3': '1.6', 'soilbatt4': '1.5', 'soilbatt5': '1.7', 'soilbatt6': '1.5', 'soilbatt7': '1.5', 'soilbatt8': '1.6', 'leakbatt1': '5', 'wh90batt': '2.62', 'freq': '868M', 'model': 'GW2000A', 'interval': '60')>"
},
"sensors": {
"runtime": "7102178",
"heap": "158428",
"dateutc": "2025-03-28 11:49:42",
"tempinf": 69.44,
"humidityin": 48,
"baromrelin": 30.038,
"baromabsin": 27.882,
"tempf": 50.18,
"humidity": 55,
"winddir": 50,
"windspeedmph": 0.0,
"windgustmph": 2.01,
"maxdailygust": 7.38,
"solarradiation": 471.96,
"uv": 3,
"rrain_piezo": 0.0,
"erain_piezo": 0.0,
"hrain_piezo": 0.0,
"drain_piezo": 0.0,
"wrain_piezo": 0.276,
"mrain_piezo": 0.843,
"yrain_piezo": 5.654,
"ws90cap_volt": 5.3,
[b]"srain_piezo": 0,[/b]
"temp1f": 46.94,
"humidity1": 80,
"temp2f": 55.4,
"humidity2": 64,
Ich habe allerdings auch den Workaround von "smuliv" angewendet.
Will sagen, 'srain_piezo' funktioniert in dieser Konfiguration (WS90 FW 1.4.3; GW2000 FW 3.1.5; HA Core 2025.3.4; Supervisor 2025.03.3)
- nur eine Frage.
