Nachdem bei Werner zu sehen ist, was mit weewx alles geht
, hab ich mich bisschen mit den GW1000 Treibern beschäftigt. Flugs von hier installiert, dazu noch das GTS Plugin, laut seiner Beschreibung konfiguriert, soweit alles Tutti. Jetzt gibt es noch kleinere Baustellen, wie z.B. bei weewx auf der Linken Seite unter Signal: da wird ein "wh24_sig" eingeblendet, welcher hier hardwaremäßig nicht vorhanden ist.
Habe alles in der weewx.conf auskommentiert, was mit "w24" zu tun hat, dennoch verschwindet es nicht.
wh24_sig in der sensors.inc entfernen funktioniert, ist doch nicht der Sinn der Sache, oder?
- Screenshot 2022-07-12 at 12-29-35 Salzgitter Lobmachtersen.png (35.96 KiB) 2038 mal betrachtet
Zweite Sache, "sunshine_time", ganz unten. Was rechnet er da?
Sieht bei Werner bissl anders aus.
- Screenshot 2022-07-12 at 12-30-20 Salzgitter Lobmachtersen.png (161.15 KiB) 2038 mal betrachtet
Anbei noch die weewx.conf:
Code: Alles auswählen
# WEEWX CONFIGURATION FILE
#
# Copyright (c) 2009-2021 Tom Keffer <tkeffer@gmail.com>
# See the file LICENSE.txt for your rights.
##############################################################################
# This section is for general configuration information.
# Set to 1 for extra debug info, otherwise comment it out or set to zero
debug = 0
# Root directory of the weewx data file hierarchy for this station
WEEWX_ROOT = /
# Whether to log successful operations
log_success = True
# Whether to log unsuccessful operations
log_failure = True
# How long to wait before timing out a socket (FTP, HTTP) connection
socket_timeout = 20
# Do not modify this. It is used when installing and updating weewx.
version = 4.8.0
##############################################################################
# This section is for information about the station.
[Station]
# Description of the station location
location = Salzgitter Lobmachtersen
# Latitude in decimal degrees. Negative for southern hemisphere
latitude = 52.15
# Longitude in decimal degrees. Negative for western hemisphere.
longitude = 10.36
# Altitude of the station, with unit it is in. This is downloaded from
# from the station if the hardware supports it.
altitude = 102, meter
# Set to type of station hardware. There must be a corresponding stanza
# in this file with a 'driver' parameter indicating the driver to be used.
# station_type = Interceptor
station_type = GW1000
# If you have a website, you may specify an URL
#station_url = http://www.example.com
# The start of the rain year (1=January; 10=October, etc.). This is
# downloaded from the station if the hardware supports it.
rain_year_start = 1
# Start of week (0=Monday, 6=Sunday)
week_start = 0
##############################################################################
[GW1000]
poll_interval = 20
driver = user.gw1000
ip_address = 10.0.60.22
port = 45000
#show_all_batt = True
[[field_map_extensions]]
batteryStatus1 = wh31_ch1_batt
batteryStatus2 = wh31_ch2_batt
batteryStatus3 = wh31_ch3_batt
batteryStatus4 = wh31_ch4_batt
batteryStatus5 = wh31_ch5_batt
batteryStatus6 = wh31_ch6_batt
batteryStatus7 = wh31_ch7_batt
batteryStatus8 = wh31_ch8_batt
lightning_distance = lightningdist
lightning_disturber_count = lightningdettime
lightning_Batt = wh57_batt
co2_Temp = temp17
co2_Hum = humid17
pm10_0 = pm10
pm2_5 = pm255
co2_Batt = wh45_batt
pm25_1 = pm251
pm25_2 = pm252
pm25_3 = pm253
pm25_4 = pm254
pm25_Batt1 = wh41_ch1_batt
pm25_Batt2 = wh41_ch2_batt
pm25_Batt3 = wh41_ch3_batt
pm25_Batt4 = wh41_ch4_batt
soilTemp1 = temp9
soilTemp2 = temp10
soilTemp3 = temp11
soilTemp4 = temp12
soilTemp5 = temp13
soilTemp6 = temp14
soilTemp7 = temp15
soilTemp8 = temp16
soilTempBatt1 = wh34_ch1_batt
soilTempBatt2 = wh34_ch2_batt
soilTempBatt3 = wh34_ch3_batt
soilTempBatt4 = wh34_ch4_batt
soilTempBatt5 = wh34_ch5_batt
soilTempBatt6 = wh34_ch6_batt
soilTempBatt7 = wh34_ch7_batt
soilTempBatt8 = wh34_ch8_batt
soilMoistBatt1 = wh51_ch1_batt
soilMoistBatt2 = wh51_ch2_batt
soilMoistBatt3 = wh51_ch3_batt
soilMoistBatt4 = wh51_ch4_batt
soilMoistBatt5 = wh51_ch5_batt
soilMoistBatt6 = wh51_ch6_batt
soilMoistBatt7 = wh51_ch7_batt
soilMoistBatt8 = wh51_ch8_batt
leak_1 = leak1
leak_2 = leak2
leak_3 = leak3
leak_4 = leak4
leak_Batt1 = wh55_ch1_batt
leak_Batt2 = wh55_ch2_batt
leak_Batt3 = wh55_ch3_batt
leak_Batt4 = wh55_ch4_batt
leafWetBatt1 = wh35_ch1_batt
leafWetBatt2 = wh35_ch2_batt
leafWetBatt3 = wh35_ch3_batt
leafWetBatt4 = wh35_ch4_batt
leafWetBatt5 = wh35_ch5_batt
leafWetBatt6 = wh35_ch6_batt
leafWetBatt7 = wh35_ch7_batt
leafWetBatt8 = wh35_ch8_batt
rainBatteryStatus = wh40_batt
windBatteryStatus = ws80_batt
# outTempBatteryStatus = wh24_batt
# outTempBatteryStatus = wh26_batt
outTempBatteryStatus = wh65_batt
# outTempBatteryStatus = wh68_batt
# inTempBatteryStatus = wh25_batt
maxdailygust = daymaxwind
pm25_24h_co2 = pm255_24h_avg
pm10_24h_co2 = pm10_24h_avg
pm25_avg_24h_ch1 = pm251_24h_avg
pm25_avg_24h_ch2 = pm252_24h_avg
pm25_avg_24h_ch3 = pm253_24h_avg
pm25_avg_24h_ch4 = pm254_24h_avg
co2_24h = co2_24h_avg
barometer = relbarometer
rainrate = rainrate
totalRain = raintotal
eventRain = rainevent
hourRain = rainhour
dayRain = rainday
weekRain = rainweek
monthRain = rainmonth
yearRain = rainyear
# wh24_sig = wh24_sig
wh25_sig = wh25_sig
wh31_ch1_sig = wh31_ch1_sig
wh31_ch2_sig = wh31_ch2_sig
wh31_ch3_sig = wh31_ch3_sig
wh31_ch4_sig = wh31_ch4_sig
wh31_ch5_sig = wh31_ch5_sig
wh31_ch6_sig = wh31_ch6_sig
wh31_ch7_sig = wh31_ch7_sig
wh31_ch8_sig = wh31_ch8_sig
ws65_sig = ws65_sig
ws80_sig = ws80_sig
wh40_sig = wh40_sig
wh45_sig = wh45_sig
wh57_sig = wh57_sig
wh51_ch1_sig = wh51_ch1_sig
wh35_ch1_sig = wh35_ch1_sig
wh34_ch1_sig = wh34_ch1_sig
#signal1 = wh24_sig
#signal2 = wh31_ch1_sig
#signal3 = wh34_ch1_sig
#signal4 = wh40_sig
#signal5 = wh45_sig
#signal6 = wh57_sig
#signal7 = wh51_ch1_sig
#signal8 = wh35_ch1_sig
##############################################################################
# This section is for uploading data to Internet sites
[StdRESTful]
[[StationRegistry]]
# To register this weather station with weewx, set this to true
register_this_station = false
[[AWEKAS]]
# This section is for configuring posts to AWEKAS.
# If you wish to do this, set the option 'enable' to true,
# and specify a username and password.
# To guard against parsing errors, put the password in quotes.
enable = false
username = replace_me
password = replace_me
[[CWOP]]
# This section is for configuring posts to CWOP.
# If you wish to do this, set the option 'enable' to true,
# and specify the station ID (e.g., CW1234).
enable = false
station = replace_me
# If this is an APRS (radio amateur) station, uncomment
# the following and replace with a passcode (e.g., 12345).
#passcode = replace_me (APRS stations only)
[[PWSweather]]
# This section is for configuring posts to PWSweather.com.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
# To guard against parsing errors, put the password in quotes.
enable = false
station = replace_me
password = replace_me
[[WOW]]
# This section is for configuring posts to WOW.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
# To guard against parsing errors, put the password in quotes.
enable = false
station = replace_me
password = replace_me
[[Wunderground]]
# This section is for configuring posts to the Weather Underground.
# If you wish to do this, set the option 'enable' to true,
# and specify a station (e.g., 'KORHOODR3') and password.
# To guard against parsing errors, put the password in quotes.
enable = false
station = ISALZG55
password = TswR8w6E
# If you plan on using wunderfixer, set the following
# to your API key:
api_key = replace_me
# Set the following to True to have weewx use the WU "Rapidfire"
# protocol. Not all hardware can support it. See the User's Guide.
rapidfire = False
##############################################################################
# This section specifies what reports, using which skins, to generate.
[StdReport]
# Where the skins reside, relative to WEEWX_ROOT
SKIN_ROOT = /etc/weewx/skins
# Where the generated reports should go, relative to WEEWX_ROOT
HTML_ROOT = /var/www/html/weewx
# The database binding indicates which data should be used in reports.
data_binding = wx_binding
# Whether to log a successful operation
log_success = False
# Whether to log an unsuccessful operation
log_failure = True
# Each of the following subsections defines a report that will be run.
# See the customizing guide to change the units, plot types and line
# colors, modify the fonts, display additional sensor data, and other
# customizations. Many of those changes can be made here by overriding
# parameters, or by modifying templates within the skin itself.
[[SeasonsReport]]
# The SeasonsReport uses the 'Seasons' skin, which contains the
# images, templates and plots for the report.
skin = Seasons
enable = true
lang = own
[[SmartphoneReport]]
# The SmartphoneReport uses the 'Smartphone' skin, and the images and
# files are placed in a dedicated subdirectory.
skin = Smartphone
enable = true
HTML_ROOT = /var/www/html/weewx/smartphone
[[MobileReport]]
# The MobileReport uses the 'Mobile' skin, and the images and files
# are placed in a dedicated subdirectory.
skin = Mobile
enable = true
HTML_ROOT = /var/www/html/weewx/mobile
[[StandardReport]]
# This is the old "Standard" skin. By default, it is not enabled.
skin = Standard
enable = false
[[Belchertown]]
skin = Belchertown
HTML_ROOT = /var/www/html/weewx/belchertown
[[FTP]]
# FTP'ing the results to a webserver is treated as just another report,
# albeit one with an unusual report generator!
skin = Ftp
# If you wish to use FTP, set "enable" to "true", then
# fill out the next four lines.
# Use quotes around passwords to guard against parsing errors.
enable = false
user = replace_me
password = replace_me
server = replace_me # The ftp server name, e.g, www.myserver.org
path = replace_me # The destination directory, e.g., /weather
# Set to True for an FTP over TLS (FTPS) connection. Not all servers
# support this.
secure_ftp = False
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = /var/www/html/weewx
# Most FTP servers use port 21
port = 21
# Set to 1 to use passive mode, zero for active mode
passive = 1
[[RSYNC]]
# rsync'ing to a webserver is treated as just another report
skin = Rsync
# If you wish to use rsync, you must configure passwordless ssh using
# public/private key authentication from the user account that weewx
# runs to the user account on the remote machine where the files
# will be copied.
#
# If you wish to use rsync, set "enable" to "true", then
# fill out server, user, and path.
# The server should appear in your .ssh/config file.
# The user is the username used in the identity file.
# The path is the destination directory, such as /var/www/html/weather.
# Be sure that the user has write permissions on the destination!
enable = false
server = replace_me
user = replace_me
path = replace_me
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = /var/www/html/weewx
# Rsync can be configured to remove files from the remote server if
# they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
# make a mistake in the remote path, you could could unintentionally
# cause unrelated files to be deleted. Set to 1 to enable remote file
# deletion, zero to allow files to accumulate remotely.
delete = 0
####
# Various options for customizing your reports.
[[Defaults]]
unit_system = us
[[[Units]]]
# The following section sets what unit to use for each unit group.
# NB: The unit is always in the singular. I.e., 'mile_per_hour',
# NOT 'miles_per_hour'
[[[[Groups]]]]
group_altitude = meter # Options are 'foot' or 'meter'
group_degree_day = degree_C_day # Options are 'degree_F_day' or 'degree_C_day'
group_distance = km # Options are 'mile' or 'km'
group_pressure = mbar # Options are 'inHg', 'mmHg', 'mbar', 'hPa', or 'kPa'
group_rain = mm # Options are 'inch', 'cm', or 'mm'
group_rainrate = mm_per_hour # Options are 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'
group_speed = km_per_hour # Options are 'mile_per_hour', 'km_per_hour', 'knot', or 'meter_per_second'
group_speed2 = km_per_hour2 # Options are 'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2'
group_temperature = degree_C # Options are 'degree_F' or 'degree_C'
# The following section sets the formatting for each type of unit.
[[[[StringFormats]]]]
centibar = %.0f
cm = %.2f
cm_per_hour = %.2f
degree_C = %.1f
degree_F = %.1f
degree_compass = %.0f
foot = %.0f
hPa = %.1f
hour = %.1f
inHg = %.3f
inch = %.2f
inch_per_hour = %.2f
km = %.1f
km_per_hour = %.0f
km_per_hour2 = %.1f
knot = %.0f
knot2 = %.1f
kPa = %.2f
mbar = %.1f
meter = %.0f
meter_per_second = %.1f
meter_per_second2 = %.1f
mile = %.1f
mile_per_hour = %.0f
mile_per_hour2 = %.1f
mm = %.1f
mmHg = %.1f
mm_per_hour = %.1f
percent = %.0f
second = %.0f
uv_index = %.1f
volt = %.1f
watt_per_meter_squared = %.0f
NONE = " N/A"
# The following section overrides the label used for each type of unit
[[[[Labels]]]]
meter = " meter", " meters" # You may prefer "metre".
day = " day", " days"
hour = " hour", " hours"
minute = " minute", " minutes"
second = " second", " seconds"
NONE = ""
# The following section sets the format for each time scale.
# The values below will work in every locale, but they may not look
# particularly attractive.
[[[[TimeFormats]]]]
hour = %H:%M
day = %X
week = %X (%A)
month = %x %X
year = %x %X
rainyear = %x %X
current = %x %X
ephem_day = %X
ephem_year = %x %X
[[[[Ordinates]]]]
# Ordinal directions. The last one is for no wind direction
directions = N, NNE, NE, ENE, E, ESE, SE, SSE, S, SSW, SW, WSW, W, WNW, NW, NNW, N/A
# The following section sets the base temperatures used for the
# calculation of heating, cooling, and growing degree-days.
[[[[DegreeDays]]]]
# Base temperature for heating days, with unit:
heating_base = 65, degree_F
# Base temperature for cooling days, with unit:
cooling_base = 65, degree_F
# Base temperature for growing days, with unit:
growing_base = 50, degree_F
# A trend takes a difference across a time period. The following
# section sets the time period, and how big an error is allowed to
# still be counted as the start or end of a period.
[[[[Trend]]]]
time_delta = 10800 # 3 hours
time_grace = 300 # 5 minutes
# The labels to be used for each observation type
[[[Labels]]]
# Set to hemisphere abbreviations suitable for your location:
hemispheres = N, S, E, W
# Formats to be used for latitude whole degrees, longitude whole
# degrees, and minutes:
latlon_formats = %02d, %03d, %05.2f
# Generic labels, keyed by an observation type.
[[[[Generic]]]]
barometer = Barometer
dewpoint = Dew Point
ET = ET
heatindex = Heat Index
humidex = Humidex
inHumidity = Huminity WoZi
inTemp = Temperature WoZI
outHumidity = Humidity Aussen
outTemp = Temperature Aussen
radiation = Radiation
rain = Rain
rainRate = Rain Rate
UV = UV Index
windDir = Wind Direction
windGust = Gust Speed
windGustDir = Gust Direction
windSpeed = Wind Speed
windchill = Wind Chill
windgustvec = Gust Vector
windvec = Wind Vector
# Sensor status indicators
rxCheckPercent = Signal Quality
txBatteryStatus = Transmitter Battery
windBatteryStatus = Wind Battery
rainBatteryStatus = Rain Battery
outTempBatteryStatus = Outside Temperature Battery
inTempBatteryStatus = Inside Temperature Battery
consBatteryVoltage = Console Battery
heatingVoltage = Heating Battery
supplyVoltage = Supply Voltage
referenceVoltage = Reference Voltage
wh65_sig = WH65 Außensensor
[[[Almanac]]]
# The labels to be used for the phases of the moon:
moon_phases = New, Waxing crescent, First quarter, Waxing gibbous, Full, Waning gibbous, Last quarter, Waning crescent
##############################################################################
# This service acts as a filter, converting the unit system coming from
# the hardware to a unit system in the database.
[StdConvert]
# The target_unit affects only the unit system in the database. Once
# chosen it cannot be changed without converting the entire database.
# Modification of target_unit after starting weewx will result in
# corrupt data - the database will contain a mix of US and METRIC data.
#
# The value of target_unit does not affect the unit system for
# reporting - reports can display US, Metric, or any combination of units.
#
# In most cases, target_unit should be left as the default: US
#
# In particular, those migrating from a standard wview installation
# should use US since that is what the wview database contains.
# DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
target_unit = US # Options are 'US', 'METRICWX', or 'METRIC'
##############################################################################
# This section can adjust data using calibration expressions.
[StdCalibrate]
[[Corrections]]
# For each type, an arbitrary calibration expression can be given.
# It should be in the units defined in the StdConvert section.
# Example:
foo = foo + 0.2
radiation = luminosity / 126.7
# luminosity = radiation * 126.7
# rxCheckPercent = ws80_sig * 25 if ws80_sig is not None else None
rxCheckPercent = ws65_sig * 25 if ws65_sig is not None else None
# signal2 = wh24_sig * 25 if wh24_sig is not None else None
signal31_1 = wh31_ch1_sig * 25 if wh31_ch1_sig is not None else None
signal31_2 = wh31_ch2_sig * 25 if wh31_ch1_sig is not None else None
signal31_3 = wh31_ch3_sig * 25 if wh31_ch1_sig is not None else None
signal31_4 = wh31_ch4_sig * 25 if wh31_ch1_sig is not None else None
signal31_5 = wh31_ch5_sig * 25 if wh31_ch1_sig is not None else None
signal31_6 = wh31_ch6_sig * 25 if wh31_ch1_sig is not None else None
signal31_7 = wh31_ch7_sig * 25 if wh31_ch1_sig is not None else None
signal31_8 = wh31_ch8_sig * 25 if wh31_ch1_sig is not None else None
signal34_1 = wh34_ch1_sig * 25 if wh34_ch1_sig is not None else None
# signal40 = wh40_sig * 25 if wh40_sig is not None else None
# signal45 = wh45_sig * 25 if wh45_sig is not None else None
# signal57 = wh57_sig * 25 if wh57_sig is not None else None
signal51_1 = wh51_ch1_sig * 25 if wh51_ch1_sig is not None else None
# signal8 = wh35_ch1_sig * 25 if wh35_ch1_sig is not None else None
##############################################################################
# This section is for quality control checks. If units are not specified,
# values must be in the units defined in the StdConvert section.
[StdQC]
[[MinMax]]
barometer = 26, 32.5, inHg
pressure = 24, 34.5, inHg
outTemp = -40, 120, degree_F
inTemp = 10, 120, degree_F
outHumidity = 0, 100
inHumidity = 0, 100
windSpeed = 0, 120, mile_per_hour
rain = 0, 10, inch
##############################################################################
# This section controls the origin of derived values.
[StdWXCalculate]
[[Calculations]]
# How to calculate derived quantities. Possible values are:
# hardware - use the value provided by hardware
# software - use the value calculated by weewx
# prefer_hardware - use value provide by hardware if available,
# otherwise use value calculated by weewx
pressure = prefer_hardware
altimeter = prefer_hardware
appTemp = prefer_hardware
barometer = prefer_hardware
cloudbase = prefer_hardware
dewpoint = prefer_hardware
ET = prefer_hardware
heatindex = prefer_hardware
humidex = prefer_hardware
inDewpoint = prefer_hardware
maxSolarRad = prefer_hardware
rainRate = prefer_hardware
windchill = prefer_hardware
windrun = prefer_hardware
GTS = software, archive
GTSdate = software, archive
utcoffsetLMT = software, archive
dayET = prefer_hardware, archive
ET24 = prefer_hardware, archive
yearGDD = software, archive
seasonGDD = software, archive
##############################################################################
# For hardware that supports it, this section controls how often the
# onboard clock gets updated.
[StdTimeSynch]
# How often to check the weather station clock for drift (in seconds)
clock_check = 14400
# How much it can drift before we will correct it (in seconds)
max_drift = 5
##############################################################################
# This section is for configuring the archive service.
[StdArchive]
# If the station hardware supports data logging then the archive interval
# will be downloaded from the station. Otherwise, specify it (in seconds).
archive_interval = 300
# If possible, new archive records are downloaded from the station
# hardware. If the hardware does not support this, then new archive
# records will be generated in software.
# Set the following to "software" to force software record generation.
# record_generation = hardware
record_generation = software
# Whether to include LOOP data in hi/low statistics
loop_hilo = True
# The data binding used to save archive records
data_binding = wx_binding
# Whether to log successful archive operations
log_success = True
# Whether to log unsuccessful archive operations
log_failure = True
##############################################################################
# This section binds a data store to a database.
[DataBindings]
[[wx_binding]]
# The database must match one of the sections in [Databases].
# This is likely to be the only option you would want to change.
#database = archive_sqlite
database = archive_mysql
# The name of the table within the database
table_name = archive
# The manager handles aggregation of data for historical summaries
manager = weewx.manager.DaySummaryManager
# The schema defines the structure of the database.
# It is *only* used when the database is created.
schema = schemas.wview_extended.schema
#schema = schemas.wview_ecowitt.schema
##############################################################################
# This section defines various databases.
[Databases]
# A SQLite database is simply a single file
[[archive_sqlite]]
database_name = weewx.sdb
database_type = SQLite
# MySQL
[[archive_mysql]]
database_name = weewx
database_type = MySQL
##############################################################################
# This section defines defaults for the different types of databases.
[DatabaseTypes]
# Defaults for SQLite databases
[[SQLite]]
driver = weedb.sqlite
# Directory in which the database files are located
SQLITE_ROOT = /var/lib/weewx
# Defaults for MySQL databases
[[MySQL]]
driver = weedb.mysql
# The host where the database is located
host = 10.0.10.209
# The user name for logging in to the host
user = weewx
# The password for the user name (quotes guard against parsing errors)
password = weewx
##############################################################################
# This section configures the internal weewx engine.
[Engine]
# The following section specifies which services should be run and in what order.
[[Services]]
prep_services = weewx.engine.StdTimeSynch
data_services = ,
process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate, weewx.engine.StdQC, weewx.wxservices.StdWXCalculate, user.sunduration.SunshineDuration, user.radiationhours.RadiationHours
# process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate, weewx.engine.StdQC, weewx.wxservices.StdWXCalculate, user.sunduration.SunshineDuration, user.radiationhours.RadiationHours, user.wswincsv.WswinCSV
# process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate, weewx.engine.StdQC, weewx.wxservices.StdWXCalculate
xtype_services = weewx.wxxtypes.StdWXXTypes, weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater, weewx.wxxtypes.StdDelta, user.GTS.GTSService
# xtype_services = weewx.wxxtypes.StdWXXTypes, weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater, weewx.wxxtypes.StdDelta
archive_services = weewx.engine.StdArchive
restful_services = weewx.restx.StdStationRegistry, weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS
report_services = weewx.engine.StdPrint, weewx.engine.StdReport
##############################################################################
[RadiationDays]
# min_sunshine = 120
sunshine_log = 1
sunshine_coeff = 72
sunshine_min = 18
##############################################################################
[Accumulator]
[[daymaxwind]]
extractor = last
[[lightning_distance]]
extractor = last
[[lightning_strike_count]]
extractor = sum
[[lightning_last_det_time]]
extractor = last
[[lightningcount]]
extractor = last
[[stormRain]]
extractor = last
[[hourRain]]
extractor = last
[[dayRain]]
extractor = last
[[weekRain]]
extractor = last
[[monthRain]]
extractor = last
[[yearRain]]
extractor = last
[[totalRain]]
extractor = last
[[pm2_51_24hav]]
extractor = last
[[pm2_52_24hav]]
extractor = last
[[pm2_53_24hav]]
extractor = last
[[pm2_54_24hav]]
extractor = last
[[24havpm255]]
extractor = last
[[pm2_51_24h_avg]]
extractor = last
[[pm2_52_24h_avg]]
extractor = last
[[pm2_53_24h_avg]]
extractor = last
[[pm2_54_24h_avg]]
extractor = last
[[pm2_55_24h_avg]]
extractor = last
[[pm10_24h_avg]]
extractor = last
[[co2_24h_avg]]
extractor = last
[[wh25_batt]]
extractor = last
[[wh26_batt]]
extractor = last
[[wh31_ch1_batt]]
extractor = last
[[wh31_ch2_batt]]
extractor = last
[[wh31_ch3_batt]]
extractor = last
[[wh31_ch4_batt]]
extractor = last
[[wh31_ch5_batt]]
extractor = last
[[wh31_ch6_batt]]
extractor = last
[[wh31_ch7_batt]]
extractor = last
[[wh31_ch8_batt]]
extractor = last
[[wh35_ch1_batt]]
extractor = last
[[wh35_ch2_batt]]
extractor = last
[[wh35_ch3_batt]]
extractor = last
[[wh35_ch4_batt]]
extractor = last
[[wh35_ch5_batt]]
extractor = last
[[wh35_ch6_batt]]
extractor = last
[[wh35_ch7_batt]]
extractor = last
[[wh35_ch8_batt]]
extractor = last
[[wh40_batt]]
extractor = last
[[wh41_ch1_batt]]
extractor = last
[[wh41_ch2_batt]]
extractor = last
[[wh41_ch3_batt]]
extractor = last
[[wh41_ch4_batt]]
extractor = last
[[wh45_batt]]
extractor = last
[[wh51_ch1_batt]]
extractor = last
[[wh51_ch2_batt]]
extractor = last
[[wh51_ch3_batt]]
extractor = last
[[wh51_ch4_batt]]
extractor = last
[[wh51_ch5_batt]]
extractor = last
[[wh51_ch6_batt]]
extractor = last
[[wh51_ch7_batt]]
extractor = last
[[wh51_ch8_batt]]
extractor = last
[[wh51_ch9_batt]]
extractor = last
[[wh51_ch10_batt]]
extractor = last
[[wh51_ch11_batt]]
extractor = last
[[wh51_ch12_batt]]
extractor = last
[[wh51_ch13_batt]]
extractor = last
[[wh51_ch14_batt]]
extractor = last
[[wh51_ch15_batt]]
extractor = last
[[wh51_ch16_batt]]
extractor = last
[[wh55_ch1_batt]]
extractor = last
[[wh55_ch2_batt]]
extractor = last
[[wh55_ch3_batt]]
extractor = last
[[wh55_ch4_batt]]
extractor = last
[[wh57_batt]]
extractor = last
[[wh65_batt]]
extractor = last
[[wh68_batt]]
extractor = last
[[ws80_batt]]
extractor = last
[[ws90_batt]]
extractor = last
[[wh40_sig]]
extractor = last
[[wh26_sig]]
extractor = last
[[wh25_sig]]
extractor = last
[[wh65_sig]]
extractor = last
[[wh31_ch1_sig]]
extractor = last
[[wh31_ch2_sig]]
extractor = last
[[wh31_ch3_sig]]
extractor = last
[[wh31_ch4_sig]]
extractor = last
[[wh31_ch5_sig]]
extractor = last
[[wh31_ch6_sig]]
extractor = last
[[wh31_ch7_sig]]
extractor = last
[[wh31_ch8_sig]]
extractor = last
[[wh34_ch1_sig]]
extractor = last
[[wh34_ch2_sig]]
extractor = last
[[wh34_ch3_sig]]
extractor = last
[[wh34_ch4_sig]]
extractor = last
[[wh34_ch5_sig]]
extractor = last
[[wh34_ch6_sig]]
extractor = last
[[wh34_ch7_sig]]
extractor = last
[[wh34_ch8_sig]]
extractor = last
[[wh35_ch1_sig]]
extractor = last
[[wh35_ch2_sig]]
extractor = last
[[wh35_ch3_sig]]
extractor = last
[[wh35_ch4_sig]]
extractor = last
[[wh35_ch5_sig]]
extractor = last
[[wh35_ch6_sig]]
extractor = last
[[wh35_ch7_sig]]
extractor = last
[[wh35_ch8_sig]]
extractor = last
[[wh41_ch1_sig]]
extractor = last
[[wh41_ch2_sig]]
extractor = last
[[wh41_ch3_sig]]
extractor = last
[[wh41_ch4_sig]]
extractor = last
[[wh45_sig]]
extractor = last
[[wh51_ch1_sig]]
extractor = last
[[wh51_ch2_sig]]
extractor = last
[[wh51_ch3_sig]]
extractor = last
[[wh51_ch4_sig]]
extractor = last
[[wh51_ch5_sig]]
extractor = last
[[wh51_ch6_sig]]
extractor = last
[[wh51_ch7_sig]]
extractor = last
[[wh51_ch8_sig]]
extractor = last
[[wh51_ch9_sig]]
extractor = last
[[wh51_ch10_sig]]
extractor = last
[[wh51_ch11_sig]]
extractor = last
[[wh51_ch12_sig]]
extractor = last
[[wh51_ch13_sig]]
extractor = last
[[wh51_ch14_sig]]
extractor = last
[[wh51_ch15_sig]]
extractor = last
[[wh51_ch16_sig]]
extractor = last
[[wh55_ch1_sig]]
extractor = last
[[wh55_ch2_sig]]
extractor = last
[[wh55_ch3_sig]]
extractor = last
[[wh55_ch4_sig]]
extractor = last
[[wh57_sig]]
extractor = last
[[wh68_sig]]
extractor = last
[[ws80_sig]]
extractor = last
[[ws90_sig]]
extractor = last
